What Is the First Step After Your Offer Is Accepted?
Book the inspection on the day your contract is signed. Most Texas purchase contracts give you an option period, and every step that follows, including the inspection, any specialist visits and your repair request, has to fit inside it. Your agent can tell you exactly how many days you have and when they end.
Waiting even a couple of days can squeeze your time to get contractor estimates later. With three licensed inspectors on the team, Rod Inspects has more than one calendar to work with. You can schedule online in a few minutes or call (210) 255-3134.
What Happens When You Book With Rod Inspects?
You give us the address and a few details about the home: approximate size, year built, and whether there's a pool, spa, sprinkler system or detached structure. Those details shape the scope of the inspection, so mention all of them up front.
Before inspection day you'll receive an inspection agreement to review and sign. It spells out what the inspection covers and what it doesn't, so read it.
This is also the time to add optional inspections. A pool and irrigation inspection is common in Bexar County backyards. Rod Inspects also uses infrared thermal technology to identify temperature patterns that the naked eye misses, which may indicate moisture or missing insulation.
One practical point: the utilities need to be on. The inspector can't run the air conditioning, water heater, plumbing or appliances in a house with the power, water or gas shut off. If the home is vacant, ask your agent to confirm with the seller's side that everything will be on.
What Does the Inspector Check on Inspection Day?
Every major system a Texas inspector is required to evaluate under the TREC Standards of Practice, which are the state's minimum. In plain terms, the inspector works through:
- The exterior and grounds: grading and drainage, siding and brick, windows, doors, porches, decks and driveways
- The roof: coverings, flashing, penetrations and gutters, plus signs of hail or wind damage
- The structure and foundation: visible signs of movement, floor slopes, and cracks in walls, ceilings and brick
- The attic: framing, insulation, ventilation, and the air handler and ductwork that many San Antonio homes keep up there
- Electrical, plumbing and HVAC: the panel and visible wiring, supply and drain lines, the water heater, and the heating and cooling system under normal controls
- The interior and built-in appliances: walls, ceilings, floors, doors and kitchen appliances
The inspection is visual and non-invasive. Walls aren't opened and equipment isn't taken apart. Our What's Inspected page lists every system in detail.

Should You Be at the Inspection?
If you can, yes. You're welcome to attend. This is the part of the day where you learn the most. Standing next to the inspector, you'll see where the main water shutoff and electrical panel are, which findings matter most and which are ordinary upkeep.
Can't be there? Plenty of San Antonio buyers are relocating, some on military orders. Rod Stewardson is a U.S. Navy veteran, and the report is written with photographs so you can follow every finding from wherever you are.
What Is in a TREC Inspection Report?
Texas-licensed inspectors use TREC's standard report form, so every Texas report shares the same layout. Next to each item the inspector marks I (Inspected), NI (Not Inspected), NP (Not Present) or D (Deficient). The form is organized into Structural Systems, Electrical Systems, Heating, Ventilation and Air Conditioning Systems, Plumbing Systems, Appliances, and Optional Systems.
Rod Inspects adds photographs and plain-language comments so you can see each finding, not just read about it. Browse a sample report, and keep our home inspection terms page open the first time you read one.
Two things to remember. A home can't pass or fail. And a box marked "Deficient" means the inspector saw something that needs attention, which is not the same as a reason to cancel.

How Do You Use the Report Before the Option Period Ends?
Sort the findings into three piles:
- Safety items, such as electrical hazards or a missing safety device
- Big-ticket items, such as foundation movement, roof wear or an aging cooling system
- Maintenance, the small fixes every house collects
Where the report recommends a specialist, like a structural engineer, a licensed electrician or an HVAC technician, book that visit right away and ask for a written estimate. Then decide with your agent whether to ask the seller for repairs, a credit at closing or a lower price, or whether to step away. All of that has to happen before your option period ends, which is why that first call matters so much.
What Happens After the Inspection, Before Closing?
If the seller agrees to repairs, ask for receipts and the names of the contractors who did the work. Before closing, do your own final walk-through to confirm the house is in the condition you agreed to.
After you move in, keep the report. It doubles as a maintenance list for your first years in the home. If you bought new construction, a builder's warranty inspection before the first-year warranty runs out is the next step in the process.
